Wax granules ItalWax FilmWax White chocolate 500 g

popular medium thickness wax with titanium dioxide

Special depilation wax heated in tin cans. It is applied very thinly with a spatula and removes like film wax without depilatory paper.

Medium density wax with titanium dioxide. Characterised by high plasticity without forming elastic threads. Does not cause irritation and redness of the skin. Suitable for removing thick and short hairs.

Transparent, so-called foil wax, is removed like film wax. It hardens quickly, which allows experienced beauticians to depilate relatively quickly and save time. It is suitable for removing both thick and short hairs. Granulated wax allows beauticians to add the required amount of wax to the container at any time and continue working without interruption.

Average consumption per client - 100 g. Recommended heating temperature - no more than 42 degrees.

Packaging: 500 g

Procedure of hair removal with film wax:

Warm the wax to a working temperature of 42 degrees.
Use a toner before depilation to degrease the skin and remove small impurities.
Apply a small amount of film wax with a spatula in a thin layer, regardless of the direction of hair growth. Leave a small ‘donkey's ear’ at the end, which will come in handy for removing the wax later.
TIP: Take your time during application and apply the wax so that it adheres firmly to the skin.

The wax will harden within 3-4 seconds. In this short time, all hairs should be attached to the wax (the wax should not stick to your fingers when you touch it).

Stretch the skin in the direction opposite to the depilation direction (this will help you remove the wax faster).

Repeat the process on other areas of the skin.

After the hair removal process is complete, use an oil-free aftercare product.

Common mistakes when working with film wax:

Wax pulls like caramel and is difficult to remove = wax has not had time to harden = apply a small amount of wax to the area again, wait 2-3 seconds and remove.
Some of the hairs did not disappear after wax removal = the wax was applied superficially, without sufficient pressure of the spatula on the skin, the hairs did not reach the wax layer = apply wax to the areas of the skin where hairs remain and repeat depilation.
The wax does not harden = the layer applied is too thick = this wax is applied in a very thin layer = carefully spread the wax over the selected area and apply a much thinner layer.
After removal, the edge of the wax remains on the skin = uneven wax application = the wax should be applied evenly, both on the edges and in the middle.