ItalWax FilmWax Granules Plum 1kg

Medium thickness wax ideal for sensitive body parts

Film wax is a special wax for depilation, which is heated in tin cans. It is applied with a spatula in a very thin layer and removed in the same way as film wax, without depilatory paper.

Plum wax with natural resin content of medium density, purple color, is heated at a temperature of 40-45 degrees. Special ingredients give the wax exceptional plasticity. It is ideal for very sensitive areas of the body - armpits, bikini area, face and Brazilian depilation. Removes hair from 1 mm long, and it is not necessary to follow the direction of hair growth. Captures even the shortest and thickest hairs. The hardening time is 10-12 seconds, which allows even beginners to more carefully apply wax to the depilated area of the body.

The procedure will especially appeal to clients with very sensitive skin and a low pain threshold.

Depilation with FILMWAX wax is virtually PAINLESS.

The average consumption per client is 100 g.

Packaging: 1000 g

The procedure for hair removal with film wax:

Heat the wax to a working temperature of 40 - 45 degrees.
Use a toner before depilation to degrease the skin and remove small impurities.
Apply a small amount of film wax - apply a thin layer with a spatula, regardless of the direction of hair growth. Leave a small "ear" at the end - you will use it to remove the wax later.
TIP: Take your time when applying, apply the wax so that it sticks well to the skin. The wax will harden within 10-12 seconds. During this time, all the hairs should stick to the wax (the wax should not stick to your fingers when touched).
Stretch the skin in the direction opposite to the direction of epilation (this will help remove the wax faster).
Repeat the procedure on other areas of the skin.
After epilation, use oil-free after-epilation products.
Common mistakes when working with film wax:

The wax stretches like caramel and is difficult to remove = the wax has not had time to harden = apply a small amount of wax to this area again, wait 2-3 seconds and remove.
After removing the wax, some hairs remain = the wax was applied superficially, without sufficient pressure from the spatula on the skin, the hairs did not reach the wax layer = apply wax to the areas of the skin where the hairs remained and repeat the depilation.
The wax does not harden = the applied layer is too thick = this wax is applied in a very thin layer = carefully spread the wax over the selected area and use a much thinner layer.
After removal, the edge of the wax remains on the skin = uneven application of wax = the wax must be applied in an even layer, both at the edges and in the middle.