ItalWax FilmWax 500 g lip wax granules

Medium thickness film wax

Film wax is a special wax for depilation, which is heated in tin cans. It is applied with a spatula in a very thin layer and removed in the same way as film wax, without depilatory paper.

Wax containing natural resin, transparent pink, is heated to a temperature of 40-45 degrees. Suitable for very sensitive areas of the body - armpits, bikini area, face and Brazilian depilation. Removes hair from 1 mm long, and it is not necessary to follow the direction of hair growth. The hardening time is 10-12 seconds, which allows even beginners to carefully apply wax to the area of the body to be depilated.

This wax will be especially appreciated by clients with very sensitive skin and a low pain threshold.

Depilation with FILMWAX wax is not absolutely PAINLESS, but the pain is significantly reduced.

The average consumption per client is 100 g.

Packaging: 1000 g

Film wax hair removal procedure:

Warm up the wax to a working temperature of 40 - 45 degrees.
Use a toner before depilation to degrease the skin and remove small impurities.
Apply a small amount of film wax with a spatula in a thin layer, regardless of the direction of hair growth. Leave a small "donkey's eye" at the end, which will then serve as a handle for removing the wax. TIP: Do not rush to apply the wax, apply it so that it sticks well to the skin.
The wax will harden within 10-12 seconds. During this time, all hairs should be attached to the wax (the wax should not stick to your fingers when touched).
Stretch the skin in the direction opposite to the direction of depilation (this will help you remove the wax faster).
Repeat the process on other areas of the skin.
After epilation, use oil-free after-epilation products.
Common mistakes when working with film wax:

The wax stretches like caramel and is difficult to remove = the wax has not had time to harden = apply a small amount of wax to this area again, wait 2-3 seconds and remove.
After removing the wax, some hairs remain = the wax was applied superficially, without sufficient pressure from the spatula on the skin, the hairs did not reach the wax layer = apply wax to the areas of the skin where hairs remained and repeat epilation.
The wax does not harden = the applied layer is too thick = this wax is applied in a very thin layer = carefully spread the wax over the selected area and use a much thinner layer.
After removal, the edge of the wax remains on the skin = uneven application of wax = the wax must be applied in an even layer, both at the edges and in the middle.
Package: 500 g