Granules of wax ItalWax FilmWax natural 500 g

Medium thickness wax for short and thick hair

Special wax for depilation, heated in tin cans. It is applied with a spatula in a very thin layer and removed like film wax without depilatory paper.

Medium density wax with titanium dioxide. It is highly flexible without forming elastic threads. It does not cause irritation or redness of the skin. It is suitable for removing thick and short hairs.

Transparent, so-called foil wax, is removed like film wax. It hardens quickly, which allows experienced cosmetologists to perform depilation relatively quickly and save time. It is suitable for removing both thick and short hairs. Granulated wax allows the cosmetologist to add the required amount of wax to the container at any time and continue working without interruption.

Average consumption per client is 100 g. The recommended heating temperature is no more than 42 degrees.

Packaging: 500 g

Film wax hair removal procedure:

Heat the wax to a working temperature of 42 degrees.
Use a toner before depilation to degrease the skin and remove small impurities.
Apply a small amount of film wax with a spatula in a thin layer, regardless of the direction of hair growth. Leave a small "donkey's eye" at the end, which will be useful for removing the wax later.
TIP: Take your time when applying, apply the wax so that it fits tightly to the skin.

The wax will harden within 3-4 seconds. During this short time, all hairs should attach to the wax (the wax should not stick to your fingers when touched).

Stretch the skin in the direction opposite to the direction of depilation (this will help you remove the wax faster).

Repeat the process on other areas of the skin.

After completing the hair removal procedure, use oil-free after-depilation products.

Common mistakes when working with film wax:

The wax stretches like caramel and is difficult to remove = the wax has not had time to harden = apply a small amount of wax to this area again, wait 2-3 seconds and remove.
After removing the wax, some hairs have not disappeared = the wax was applied superficially, without sufficient pressure of the spatula on the skin, the hairs have not reached the wax layer = apply wax to the areas of the skin where the hairs remain and repeat the depilation.
The wax does not harden = the applied layer is too thick = this wax is applied in a very thin layer = carefully spread the wax over the selected area and apply a much thinner layer.
After removal, the edge of the wax remains on the skin = uneven application of wax = the wax must be applied in an even layer, both at the edges and in the middle.